Renasculpt® FE60 RF EMS Sculpting Machine
Renasculpt® FE60 RF EMS Sculpting Machine
Renasculpt® FE60 RF EMS Sculpting Machine
Renasculpt® FE60 RF EMS Sculpting Machine
Renasculpt® FE60 RF EMS Sculpting Machine
Renasculpt® FE60 RF EMS Sculpting Machine
Renasculpt® FE60 RF EMS Sculpting Machine
Renasculpt® FE60 RF EMS Sculpting Machine
Renasculpt® FE60 RF EMS Sculpting Machine
Renasculpt® FE60 RF EMS Sculpting Machine
Renasculpt® FE60 RF EMS Sculpting Machine
Renasculpt® FE60 RF EMS Sculpting Machine
Renasculpt® FE60 RF EMS Sculpting Machine
Renasculpt® FE60 RF EMS Sculpting Machine

Renasculpt® FE60 RF EMS Sculpting Machine

Product Description

技术:HIEMT+EMS+RF
型号:FE60
用途:增肌、燃脂、紧致肌肤
能量:15T 
功率:5000W
治疗频率:最适宜135Hz 放松疗法
手柄:4个手柄(EMS身体手柄)+ EMS座椅
电压:110V~220V,50/60Hz

 

您是否正在寻找能够助您实现理想身材的尖端科技?Renasculpt FE60 EMS 塑形仪正是您的理想之选!这款先进的仪器,又称肌肉塑形仪,采用革命性的 HIEMT 射频和 EMS 技术,其效果相当于在短短 30 分钟内完成 10 万次仰卧起坐。使用Renasculpt FE60 EMS 塑形仪提升您的美容院或诊所的档次,为您的客户提供最先进的减脂塑形方案。领先竞争对手,为您的客户提供最佳效果和盈利能力。不要错过这项尖端科技——立即体验Renasculpt FE60 EMS 塑形仪!

Introducing of RENASCULPT® FE60

Ems雕刻机

FE60 EMS 塑形机,又名RenaSculpt,采用 HIEMT 技术,相当于 30 分钟内完成 100,000 次仰卧起坐。

FE60 EMS塑形仪是一款先进的减脂设备,融合了最新的三合一技术,包括高强度电磁脉冲技术(HIEMT)、电磁脉冲肌肉刺激(EMS)和微电流射频技术。该技术将高度聚焦的电磁能量精准作用于特定部位,从而实现100%的肌肉收缩。三重功效,可快速实现高达50%的减脂和35%的增肌。FE60 EMS塑形仪旨在提供最佳效果和盈利能力,是美容院和诊所业主寻求为客户提供尖端治疗方案的理想之选。

 

Why use of RENASCULPT FE60

Ems雕刻机

• 增加肌肉并减少脂肪,而不会使胸部变瘦。

• 女士臀部,助您展现性感魅力。

• 产后女性注重隐私,立场坚定,且灵活变通。

• 产后妇女腹部,改善腹直肌分离。

• 针对腹部和美人鱼线条的极限肌肉锻炼。

Principle of RENASCULPT FE60

Ems雕刻机

FE60 EMS塑形仪是一款非侵入式医疗美容设备,采用高强度电磁肌肉训练(HIEMT)技术。它通过电磁场产生集中而强烈的肌肉收缩,也称为超强收缩。这种收缩比常规运动中自主肌肉收缩的效果更强。RenaSculpt FE60设备正是利用HIEMT技术刺激肌肉组织、促进肌肉生长并增强肌肉紧致度的 典型产品之一。

 

在使用RenaSculpt FE60 EMS塑形仪进行治疗时,FE60 EMS塑形仪会被放置在身体的目标部位。它会发射电磁脉冲,诱发肌肉的非自主收缩,从而刺激并重塑肌肉组织。随着时间的推移,这将改善肌肉张力和线条。

 

除了肌肉刺激功能外,FE60 EMS塑形仪还提供一个名为盆底肌椅的可选组件。该组件可提供全面的治疗体验,并有助于改善盆底肌功能。

 

总体而言,FE60 利用 HIEMT 技术刺激肌肉收缩,促进肌肉生长,改善肌肉紧实度,从而增强美观和美学效果。

1440-346
FE60

3 In 1 Technology of RENASCULPT FE60

Ems雕刻机

EMS塑形仪采用高强度聚焦电磁技术,
通过短时强效肌肉收缩,增加肌肉密度,减少肌肉体积,提升肌肉线条,改善肌肉紧致度。此外,该技术还能消除脂肪细胞,因此不仅能增肌,还能减脂。临床研究表明,一个疗程后,肌肉量可增加35%,脂肪量可减少50%。

 

EMS 塑形仪的电肌肉刺激
EMS 是一种电疗,它利用电脉冲刺激肌肉收缩,这种刺激可以产生快速而频繁、快速且间歇较长的肌肉收缩,因此在肌肉锻炼方面也能取得良好的效果。

 

射频
(RF)塑形仪是一种非手术紧肤方法。该疗法利用能量波加热皮肤深层(真皮层),刺激胶原蛋白生成,从而达到紧致肌肤的效果。

Renasculpt

Benefit from RENASCULPT FE60

Ems雕刻机

Renasculpt EMS塑形仪利用能量以自主运动无法达到的强度收缩目标区域的肌肉纤维。这种极强的刺激迫使肌肉适应,从而增加肌肉纤维和细胞的数量和体积。临床研究表明,肌肉体积平均增加35%。

由于射频加热,肌肉温度迅速升高数度。这使肌肉为承受压力做好准备,类似于运动前的热身活动。不到4分钟,皮下脂肪的温度即可达到诱导细胞凋亡的水平,即脂肪细胞受到永久性损伤并缓慢排出体外。临床研究表明,皮下脂肪平均减少了50%。

1440-346(1)
1920-700(小)

Dual operating modes

自动/手动模式,方便专业人员操作

1920-700(1)

10-inch LED color display

  • 垂直翻转 90°
  • 水平翻转180°

1440-346(2)

Datasheet

制造商 温康激光
物品 Renasculpt FE60 EMS雕刻机
模型 FE60
技术 HIEMT + 射频 + EMS
关键词 Ems雕刻机
力量 5000瓦
活力 15特斯拉
频率 1 – 135 赫兹
把手  5 个手柄(4 个手柄 + 骨盆治疗垫)
电压 110V/220V 50-60Hz

 

FAQ

Who manufactures the Renasculpt FE60, and what technologies does it combine?

The Renasculpt FE60 is manufactured by Winkonlaser. It combines HIEMT, electrical muscle stimulation (EMS) and radiofrequency (RF) in a professional body-sculpting system. The product is presented for muscle-toning and body-contouring services. Treatment applications and client eligibility should follow the instructions and applicable authorization for the supplied equipment.

Which body applicators and pelvic accessories are included?

The FE60 listing identifies four body applicators and describes pelvic accessories. A pelvic floor chair is presented as optional, while the specification table refers to a pelvic therapy pad. Ask for an itemized packing list to confirm the supplied body applicators, whether the pad is included, and whether a separate chair is required. Do not assume that the chair and pad are interchangeable or supplied together.

Does the FE60 offer automatic and manual operation?

Yes. The FE60 has Auto and Manual operating modes and a 10-inch colour display that can be repositioned vertically and horizontally. Operator training should cover mode selection, applicator setup, client screening and use of the supplied accessories. Follow the device instructions and applicable professional requirements when selecting treatment settings.

What evidence should I review before using the advertised treatment results in my clinic’s marketing?

Request FE60-specific study reports supporting the outcome you intend to advertise. Check the equipment configuration, treatment protocol, participant selection, measurement method and follow-up period. A fat-reduction percentage and a muscle-volume percentage describe different outcomes and should not be treated as guaranteed results for every client. Exercise-equivalence claims also require their own supporting evidence.

Which product and regulatory documents should I check before importing the FE60?

Request the instructions for use, product specification, equipment identification and market-specific regulatory documentation for the supplied FE60 configuration. Check that the documents cover the intended applications and any pelvic accessories included in the order. Verify the legal manufacturer and covered models; company-level certificates and documents for other devices should not be assumed to authorize the FE60 in your destination market.

What electrical supply and installation information should I confirm?

The FE60 specification lists 110 V / 220 V at 50–60 Hz and a 5000 W power entry. Ask the supplier to confirm the required supply version and whether that power figure refers to rated electrical input or another equipment rating. Obtain the unit-specific installation requirements for the plug, circuit capacity and site preparation before delivery. A voltage listing alone is not confirmation that the unit automatically accepts both supply voltages.

What should an FE60 quotation include beyond the machine itself?

The quotation should itemize body applicators, pelvic accessories, training and delivery charges, together with warranty coverage and replacement-parts arrangements. Provide your destination, order quantity and intended configuration; include any private-label request so its availability can be confirmed. Agree on the model-specific MOQ, production and shipping schedule, and support for applicators and other components before placing the order. Send an FE60 enquiry.

Leave a Message